Center Pivot Irrigation Systems
Pro-Tech Irrigation Solutions provides full-service center pivot irrigation systems for West Texas farms and ranches - new system sales, used system upgrades, custom configurations, and complete installation. Whether you are putting in your first pivot or expanding an existing operation, our team designs and installs systems matched to your acreage, field shape, crop type, and water supply. We work with all major center pivot brands and offer GPS guidance, remote monitoring, and Variable Rate Irrigation (VRI) options to bring precision agriculture capability to any operation. Serving the Lubbock area, West Texas, the Texas Panhandle, eastern New Mexico, and western Oklahoma, Pro-Tech is the single point of contact from initial field survey through final commissioning. Our 25-plus years of experience in Ogallala Aquifer country means we understand the unique pressure on water resources here - and we build systems designed to deliver maximum crop performance with minimum water waste. New systems, used system rebuilds, corner arm configurations, and linear-move setups are all available. Contact us to discuss your field and water situation.
Serving farms 50 - - - 10,000+ acres - Row crops, ranches, orchards & commercial agriculture
Center Pivot Systems for Lubbock and West Texas Farms
Center pivot planning compares acreage, field shape, water source, crop rotation, and control needs before recommending a new system, used system rebuild, corner arm, or linear setup.
Pro-Tech works across Lubbock, Morton, Cochran County, Hale County, Lamb County, Hockley County, Terry County, Lynn County, eastern New Mexico, and western Oklahoma. That local operating pattern matters because High Plains irrigation decisions are shaped by wind, heat, pump efficiency, water availability, and narrow crop-stage timing windows.
What We Check
- Field dimensions, obstacles, corner coverage, and access roads
- Well yield, pump station capacity, and target application rate
- T-L hydraulic drive, electric drive, remote monitoring, and VRI options
- Sprinkler package selection for cotton, grain, hay, or specialty crops
- Long-term maintenance access and expansion plans
What We Offer
- Custom system design for your acreage and field shape
- New and used center pivot system options
- Full installation including tower pads and underground mainline
- All major brand sales and service
- GPS guidance and remote monitoring options
- VRI (variable rate irrigation) capability
- Corner arm and linear-move configurations
- Sprinkler package design optimized for your crops
Benefits
- Higher yields through uniform water application across the field
- Reduced labor with automated pivot control and remote monitoring
- Water conservation critical for Ogallala Aquifer sustainability
- One-call solution from design through installation and startup
- Scalable coverage from 40 acres to over 1,000 acres per pivot
- Ability to apply fertilizer and crop protection through the system
Common Applications
Center Pivot Irrigation Systems Service Areas
We provide center pivot systems services to agricultural communities across the United States. Select your state to learn more about local service.
Other Irrigation Services
Irrigation Consulting
Expert irrigation consulting for agricultural operations of all sizes. Our agronomic irrigation specialists evaluate you...
Learn More - ��Irrigation Installation
Full-service agricultural irrigation installation including center pivot systems, pump stations, mainlines, and controls...
Learn More - ��Irrigation Maintenance
Preventive maintenance programs designed to keep your irrigation equipment running at peak efficiency throughout the gro...
Learn More - ��Ready for Professional Center Pivot Systems?
Contact us today for a free consultation. Our irrigation experts are ready to help optimize your farm's water management.
Prepare for an irrigation service conversation
Start with the property or operation, the water source, the existing equipment, and the problem that needs attention. Identify whether the request concerns a new system, recurring repair, seasonal maintenance, controls, pumping, pressure, distribution, or broader planning. Share available system drawings, equipment records, controller information, prior repair notes, water-source details, and current photographs for qualified review.
Describe symptoms with timing and location. Note where pressure changes, leaks, dry areas, runoff, alarms, electrical issues, unusual noise, damaged components, or inconsistent operation appear. Record whether a problem is constant or tied to a zone, schedule, weather condition, or operating mode. Do not open energized equipment or make unsafe adjustments simply to gather information.
Map the system and access
Identify controllers, pumps, valves, filters, main lines, pivots, linear equipment, crossings, service roads, gates, and areas with limited access. Mark known buried utilities and explain any crop, livestock, traffic, soil, drainage, or terrain conditions that affect movement around the system. The responsible site contact should be available to provide access and confirm the equipment and area included in the request.
Before a visit, clear safe access where practical and keep workers, vehicles, and stored material away from the inspection area. Share lockout, electrical, confined-space, chemical, or other site procedures with the qualified service team. Weather and field conditions can change access quickly, so update the contact if a road, gate, crossing, or work area is no longer usable.
Define operating priorities
Explain the outcome that matters most: restoring operation, improving distribution, preparing for peak demand, reducing avoidable water loss, updating controls, replacing worn components, or planning a future system. Include schedule constraints and the parts of the operation that cannot be interrupted. A priority list helps separate immediate diagnosis from longer-term options that require design, products, or additional field information.
For a new or modified system, gather acreage, field layout, water information, power or engine details, crop needs, topography, and the intended operating approach. These inputs require professional evaluation; incomplete assumptions should be identified rather than treated as confirmed design facts. Product compatibility and sizing decisions should follow the approved technical assessment for the site.
Review findings and next steps
Ask what was observed, what remains uncertain, which measurements or records support the finding, and whether another component or condition should be evaluated. Review the proposed scope, exclusions, owner responsibilities, product information, and any operational steps needed before work. Keep approved changes and current documents together so the site contact and service team use the same information.
After work or inspection, confirm the affected area, operating status, follow-up observations, and records provided. Note any recommended monitoring or future decision point without treating it as completed work. Site owners should retain relevant equipment, parts, warranty, and service documentation for later troubleshooting and planning.
Build a useful maintenance record
Keep dates, symptoms, operating settings, weather or field conditions, parts information, measurements supplied by qualified technicians, and photographs together by system. A consistent record helps distinguish a recurring condition from an isolated event and gives later service conversations better context. Identify which observations came from the operator and which findings were confirmed during professional inspection.
Review the system before seasonal demand changes. Confirm that access remains available, labels and records are readable, and known follow-up items have an owner and target date. For multi-site operations, use the same naming convention for fields, zones, pumps, controllers, and major equipment so a request points to the correct asset. Do not substitute recordkeeping for required inspection, testing, or safety procedures.
Coordinate products with the approved system
Replacement parts, controls, valves, pumps, drives, and distribution components must be considered within the system where they operate. Model numbers and photographs are useful starting points, but compatibility and sizing should be confirmed before ordering or installation. Document substitutions and retain supplied product information. When an equipment change affects power, pressure, controls, structure, or operation, the responsible professionals should review the connected scope rather than treating the component as isolated.
Close the service loop
Before returning a system to its normal schedule, the responsible operator should understand the reported status, any limits on operation, and the observations requested during follow-up. Record which zones or equipment were reviewed and which were outside the scope. If monitoring is recommended, define what to watch, who will record it, and when the result should be discussed. Keep replaced-part information and updated settings with the correct asset record.
For unresolved or intermittent conditions, avoid changing several settings at once without documentation. A dated sequence of observations gives the next diagnostic conversation a clearer starting point. Escalate leaks, electrical concerns, structural damage, unsafe access, or other urgent conditions through the appropriate qualified channel for the site.
Confirm the handoff
Before closing the request, confirm the site contact, affected equipment, completed scope, remaining questions, and location of the updated records. That short review gives future operators and service personnel a reliable handoff and keeps unresolved observations attached to the correct system.